CVE, singkatan dari Common Vulnerabilities and Exposures, adalah daftar kerentanan keamanan komputer yang telah diungkapkan kepada publik.
OWASP
OWASP Top 10 adalah inisiatif yang mengidentifikasi dan mendokumentasikan 10 kerentanan keamanan teratas dalam aplikasi web.
CISA KEV
CISA Known Exploited Vulnerabilities (KEV) adalah inisiatif yang mengidentifikasi dan mempublikasikan daftar kerentanan yang diketahui telah dieksploitasi.
CPE, singkatan dari Common Platform Enumeration, adalah skema standar untuk penamaan perangkat keras, perangkat lunak, dan sistem operasi. CPE menyediakan skema penamaan terstruktur untuk mengidentifikasi dan mengklasifikasikan sistem teknologi informasi, platform, dan paket secara unik berdasarkan atribut tertentu seperti vendor, nama produk, versi, pembaruan, edisi, dan bahasa.
CWE, atau Common Weakness Enumeration, adalah daftar dan kategorisasi komprehensif tentang kelemahan dan kerentanan perangkat lunak. Ini berfungsi sebagai bahasa umum untuk mendeskripsikan kelemahan keamanan perangkat lunak dalam arsitektur, desain, kode, atau implementasi yang dapat menyebabkan kerentanan.
CAPEC, singkatan dari Common Attack Pattern Enumeration and Classification, adalah sumber daya publik yang komprehensif yang mendokumentasikan pola serangan umum yang digunakan oleh penyerang dalam serangan siber. Basis pengetahuan ini bertujuan untuk memahami dan mengartikulasikan kerentanan umum dan metode yang digunakan penyerang untuk mengeksploitasinya.
Layanan & Harga
Bantuan & Info
Cari : CVE id, CWE id, CAPEC id, vendor atau kata kunci dalam CVE
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
blk-iocost sometimes causes the following crash:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
...
RIP: 0010:_raw_spin_lock+0x17/0x30
Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00
RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001
RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0
RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003
R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000
R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600
FS: 00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0
Call Trace:
ioc_weight_write+0x13d/0x410
cgroup_file_write+0x7a/0x130
kernfs_fop_write_iter+0xf5/0x170
vfs_write+0x298/0x370
ksys_write+0x5f/0xb0
__x64_sys_write+0x1b/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This happens because iocg->ioc is NULL. The field is initialized by
ioc_pd_init() and never cleared. The NULL deref is caused by
blkcg_activate_policy() installing blkg_policy_data before initializing it.
blkcg_activate_policy() was doing the following:
1. Allocate pd's for all existing blkg's and install them in blkg->pd[].
2. Initialize all pd's.
3. Online all pd's.
blkcg_activate_policy() only grabs the queue_lock and may release and
re-acquire the lock as allocation may need to sleep. ioc_weight_write()
grabs blkcg->lock and iterates all its blkg's. The two can race and if
ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a
pd which is not initialized yet, leading to crash.
The crash can be reproduced with the following script:
#!/bin/bash
echo +io > /sys/fs/cgroup/cgroup.subtree_control
systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct
echo 100 > /sys/fs/cgroup/system.slice/io.weight
bash -c "echo '8:0 enable=1' > /sys/fs/cgroup/io.cost.qos" &
sleep .2
echo 100 > /sys/fs/cgroup/system.slice/io.weight
with the following patch applied:
> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index fc49be622e05..38d671d5e10c 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol)
> pd->online = false;
> }
>
> + if (system_state == SYSTEM_RUNNING) {
> + spin_unlock_irq(&q->queue_lock);
> + ssleep(1);
> + spin_lock_irq(&q->queue_lock);
> + }
> +
> /* all allocated, init in the same order */
> if (pol->pd_init_fn)
> list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)
I don't see a reason why all pd's should be allocated, initialized and
onlined together. The only ordering requirement is that parent blkgs to be
initialized and onlined before children, which is guaranteed from the
walking order. Let's fix the bug by allocating, initializing and onlining pd
for each blkg and holding blkcg->lock over initialization and onlining. This
ensures that an installed blkg is always fully initialized and onlined
removing the the race window.
Informasi CVE
EPSS
EPSS adalah model penilaian yang memprediksi kemungkinan suatu kerentanan dieksploitasi.
Skor EPSS
Model EPSS menghasilkan skor probabilitas antara 0 dan 1 (0 hingga 100%). Semakin tinggi skor, semakin besar probabilitas bahwa suatu kerentanan akan dieksploitasi.
Tanggal
EPSS V0
EPSS V1
EPSS V2 (> 2022-02-04)
EPSS V3 (> 2025-03-07)
EPSS V4 (> 2025-03-17)
2025-12-31
–
–
–
–
0.02%
2026-01-05
–
–
–
–
0.02%
2026-02-22
–
–
–
–
0.02%
2026-03-08
–
–
–
–
0.03%
2026-03-22
–
–
–
–
0.03%
2026-05-10
–
–
–
–
0.03%
2026-05-17
–
–
–
–
0.03%
2026-05-31
–
–
–
–
0.02%
2026-06-14
–
–
–
–
0.02%
Persentil EPSS
Persentil digunakan untuk meranking CVE berdasarkan skor EPSS mereka. Misalnya, CVE di persentil ke-95 berdasarkan skor EPSS-nya lebih mungkin dieksploitasi daripada 95% CVE lainnya. Dengan demikian, persentil digunakan untuk membandingkan skor EPSS suatu CVE dengan CVE lainnya.