| 약점 이름 | 출처 | |
|---|---|---|
| Improper Input Validation The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly. |
||
| 정보 없음. |
| 메트릭 | 점수 | 심각도 | CVSS 벡터 | 출처 |
|---|---|---|---|---|
| V4.0 | 4.4 | MEDIUM |
CVSS:4.0/AV:A/AC:H/AT:P/PR:N/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N/E:U/S:N/AU:N/R:A/V:D/RE:M/U:Amber
추가 정보
Base: Exploitabilty MetricsThe Exploitability metrics reflect the characteristics of the “thing that is vulnerable”, which we refer to formally as the vulnerable system. Attack Vector This metric reflects the context by which vulnerability exploitation is possible. Adjacent The vulnerable system is bound to a protocol stack, but the attack is limited at the protocol level to a logically adjacent topology. This can mean an attack must be launched from the same shared proximity (e.g., Bluetooth, NFC, or IEEE 802.11) or logical network (e.g., local IP subnet), or from within a secure or otherwise limited administrative domain (e.g., MPLS, secure VPN within an administrative network zone). Attack Complexity This metric captures measurable actions that must be taken by the attacker to actively evade or circumvent existing built-in security-enhancing conditions in order to obtain a working exploit. High The successful attack depends on the evasion or circumvention of security-enhancing techniques in place that would otherwise hinder the attack. These include: Evasion of exploit mitigation techniques. The attacker must have additional methods available to bypass security measures in place. For example, circumvention of address space randomization (ASLR) or data execution prevention (DEP) must be performed for the attack to be successful. Obtaining target-specific secrets. The attacker must gather some target-specific secret before the attack can be successful. A secret is any piece of information that cannot be obtained through any amount of reconnaissance. To obtain the secret the attacker must perform additional attacks or break otherwise secure measures (e.g. knowledge of a secret key may be needed to break a crypto channel). This operation must be performed for each attacked target. Attack Requirements This metric captures the prerequisite deployment and execution conditions or variables of the vulnerable system that enable the attack. Present The successful attack depends on the presence of specific deployment and execution conditions of the vulnerable system that enable the attack. These include: A race condition must be won to successfully exploit the vulnerability. The successfulness of the attack is conditioned on execution conditions that are not under full control of the attacker. The attack may need to be launched multiple times against a single target before being successful. Network injection. The attacker must inject themselves into the logical network path between the target and the resource requested by the victim (e.g. vulnerabilities requiring an on-path attacker). Privileges Required This metric describes the level of privileges an attacker must possess prior to successfully exploiting the vulnerability. None The attacker is unauthenticated prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack. User Interaction This metric captures the requirement for a human user, other than the attacker, to participate in the successful compromise of the vulnerable system. Active Successful exploitation of this vulnerability requires a targeted user to perform specific, conscious interactions with the vulnerable system and the attacker’s payload, or the user’s interactions would actively subvert protection mechanisms which would lead to exploitation of the vulnerability. Examples include: importing a file into a vulnerable system in a specific manner placing files into a specific directory prior to executing code submitting a specific string into a web application (e.g. reflected or self XSS) dismiss or accept prompts or security warnings prior to taking an action (e.g. opening/editing a file, connecting a device). Base: Impact MetricsThe Impact metrics capture the effects of a successfully exploited vulnerability. Analysts should constrain impacts to a reasonable, final outcome which they are confident an attacker is able to achieve. Confidentiality Impact This metric measures the impact to the confidentiality of the information managed by the system due to a successfully exploited vulnerability. High There is a total loss of confidentiality, resulting in all information within the Vulnerable System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server. Integrity Impact This metric measures the impact to integrity of a successfully exploited vulnerability. High There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the Vulnerable System. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the Vulnerable System. Availability Impact This metric measures the impact to the availability of the impacted system resulting from a successfully exploited vulnerability. High There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable). Sub Confidentiality Impact Negligible There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System. Sub Integrity Impact None There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System. Sub Availability Impact None There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System. Threat MetricsThe Threat metrics measure the current state of exploit techniques or code availability for a vulnerability. Exploit Code Maturity This metric measures the likelihood of the vulnerability being attacked, and is based on the current state of exploit techniques, exploit code availability, or active, 'in-the-wild' exploitation. Unreported Based on available threat intelligence each of the following must apply: No knowledge of publicly available proof-of-concept exploit code No knowledge of reported attempts to exploit this vulnerability No knowledge of publicly available solutions used to simplify attempts to exploit the vulnerability (i.e., neither the “POC” nor “Attacked” values apply) Environmental MetricsThese metrics enable the consumer analyst to customize the resulting score depending on the importance of the affected IT asset to a user’s organization, measured in terms of complementary/alternative security controls in place, Confidentiality, Integrity, and Availability. The metrics are the modified equivalent of Base metrics and are assigned values based on the system placement within organizational infrastructure. Supplemental MetricsSupplemental metric group provides new metrics that describe and measure additional extrinsic attributes of a vulnerability. While the assessment of Supplemental metrics is provisioned by the provider, the usage and response plan of each metric within the Supplemental metric group is determined by the consumer. Automatable The “Automatable” metric captures the answer to the question ”Can an attacker automate exploitation events for this vulnerability across multiple targets?” based on steps 1-4 of the kill chain2 [Hutchins et al., 2011]. These steps are reconnaissance, weaponization, delivery, and exploitation. If evaluated, the metric can take the values no or yes. No Attackers cannot reliably automate all 4 steps of the kill chain for this vulnerability for some reason. These steps are reconnaissance, weaponization, delivery, and exploitation. Recovery Recovery describes the resilience of a system to recover services, in terms of performance and availability, after an attack has been performed. Automatic The system recovers services automatically after an attack has been performed. Safety Like all Supplemental Metrics, providing a value for Safety is completely optional. Suppliers and vendors (AKA: scoring providers) may or may not provide Safety as a Supplemental Metric as they see fit. Negligible Consequences of the vulnerability meet definition of IEC 61508 consequence category 'negligible'. Value Density Value Density describes the resources that the attacker will gain control over with a single exploitation event. It has two possible values, diffuse and concentrated: Diffuse The vulnerable system has limited resources. That is, the resources that the attacker will gain control over with a single exploitation event are relatively small. An example of Diffuse (think: limited) Value Density would be an attack on a single email client vulnerability. Vulnerability Response Effort The intention of the Vulnerability Response Effort metric is to provide supplemental information on how difficult it is for consumers to provide an initial response to the impact of vulnerabilities for deployed products and services in their infrastructure. Moderate The actions required to respond to a vulnerability require some effort on behalf of the consumer and could cause minimal service impact to implement. Examples include: simple remote update, disabling of a subsystem, or a low-touch software upgrade such as a driver update. Provider Urgency Many vendors currently provide supplemental severity ratings to consumers via product security advisories. Amber Provider has assessed the impact of this vulnerability as having a moderate urgency. |
|
| V3.1 | 7.5 | HIGH |
CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
추가 정보
Base: Exploitabilty MetricsThe Exploitability metrics reflect the characteristics of the thing that is vulnerable, which we refer to formally as the vulnerable component. Attack Vector This metric reflects the context by which vulnerability exploitation is possible. Adjacent The vulnerable component is bound to the network stack, but the attack is limited at the protocol level to a logically adjacent topology. This can mean an attack must be launched from the same shared physical (e.g., Bluetooth or IEEE 802.11) or logical (e.g., local IP subnet) network, or from within a secure or otherwise limited administrative domain (e.g., MPLS, secure VPN to an administrative network zone). Attack Complexity This metric describes the conditions beyond the attacker’s control that must exist in order to exploit the vulnerability. High successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. Privileges Required This metric describes the level of privileges an attacker must possess before successfully exploiting the vulnerability. None The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack. User Interaction This metric captures the requirement for a human user, other than the attacker, to participate in the successful compromise of the vulnerable component. None The vulnerable system can be exploited without interaction from any user. Base: Scope MetricsThe Scope metric captures whether a vulnerability in one vulnerable component impacts resources in components beyond its security scope. Scope Formally, a security authority is a mechanism (e.g., an application, an operating system, firmware, a sandbox environment) that defines and enforces access control in terms of how certain subjects/actors (e.g., human users, processes) can access certain restricted objects/resources (e.g., files, CPU, memory) in a controlled manner. All the subjects and objects under the jurisdiction of a single security authority are considered to be under one security scope. If a vulnerability in a vulnerable component can affect a component which is in a different security scope than the vulnerable component, a Scope change occurs. Intuitively, whenever the impact of a vulnerability breaches a security/trust boundary and impacts components outside the security scope in which vulnerable component resides, a Scope change occurs. Unchanged An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority. Base: Impact MetricsThe Impact metrics capture the effects of a successfully exploited vulnerability on the component that suffers the worst outcome that is most directly and predictably associated with the attack. Analysts should constrain impacts to a reasonable, final outcome which they are confident an attacker is able to achieve. Confidentiality Impact This metric measures the impact to the confidentiality of the information resources managed by a software component due to a successfully exploited vulnerability. High There is a total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server. Integrity Impact This metric measures the impact to integrity of a successfully exploited vulnerability. Integrity refers to the trustworthiness and veracity of information. High There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component. Availability Impact This metric measures the impact to the availability of the impacted component resulting from a successfully exploited vulnerability. High There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable). Temporal MetricsThe Temporal metrics measure the current state of exploit techniques or code availability, the existence of any patches or workarounds, or the confidence in the description of a vulnerability. Environmental MetricsThese metrics enable the analyst to customize the CVSS score depending on the importance of the affected IT asset to a user’s organization, measured in terms of Confidentiality, Integrity, and Availability. |
nvd@nist.gov |
Netgear>>Rs700_firmware >> Version 까지 (미포함) 1.0.9.6
Netgear>>Rs700 >> Version -
Netgear>>Rax54sv2_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax54sv2 >> Version -
Netgear>>Rax45v2_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax45v2 >> Version -
Netgear>>Rax41v2_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax41v2 >> Version -
Netgear>>Rax50_firmware >> Version 까지 (미포함) 1.2.14.114
Netgear>>Rax50 >> Version -
Netgear>>Raxe500_firmware >> Version 까지 (미포함) 1.2.14.114
Netgear>>Raxe500 >> Version -
Netgear>>Rax41_firmware >> Version 까지 (미포함) 1.0.17.142
Netgear>>Rax41 >> Version -
Netgear>>Rax43_firmware >> Version 까지 (미포함) 1.0.17.142
Netgear>>Rax43 >> Version -
Netgear>>Rax35v2_firmware >> Version 까지 (미포함) 1.0.17.142
Netgear>>Rax35v2 >> Version -
Netgear>>Raxe450_firmware >> Version 까지 (미포함) 1.0.17.142
Netgear>>Raxe450 >> Version -
Netgear>>Rax43v2_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax43v2 >> Version -
Netgear>>Rax42_firmware >> Version 까지 (미포함) 1.0.17.142
Netgear>>Rax42 >> Version -
Netgear>>Rax45_firmware >> Version 까지 (미포함) 1.0.17.142
Netgear>>Rax45 >> Version -
Netgear>>Rax50v2_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax50v2 >> Version -
Netgear>>Mr90_firmware >> Version 까지 (미포함) 1.0.2.46
Netgear>>Mr90 >> Version -
Netgear>>Ms90_firmware >> Version 까지 (미포함) 1.0.2.46
Netgear>>Ms90 >> Version -
Netgear>>Rax42v2_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax42v2 >> Version -
Netgear>>Rax49s_firmware >> Version 까지 (미포함) 1.1.6.36
Netgear>>Rax49s >> Version -