CPE, viết tắt của Liệt kê nền tảng phổ biến, là một lược đồ đặt tên chuẩn hóa cho phần cứng, phần mềm và hệ điều hành. CPE cung cấp lược đồ đặt tên có cấu trúc để xác định và phân loại duy nhất các hệ thống công nghệ thông tin, nền tảng và gói phần mềm dựa trên các thuộc tính nhất định như nhà cung cấp, tên sản phẩm, phiên bản, cập nhật, phiên bản và ngôn ngữ.
CWE, hay Liệt kê điểm yếu phổ biến, là danh sách và phân loại toàn diện các điểm yếu và lỗ hổng phần mềm. Nó phục vụ như ngôn ngữ chung để mô tả các điểm yếu bảo mật phần mềm trong kiến trúc, thiết kế, mã hoặc triển khai có thể dẫn đến lỗ hổng.
CAPEC, viết tắt của Liệt kê và phân loại mẫu tấn công phổ biến, là tài nguyên toàn diện, có sẵn công khai ghi lại các mẫu tấn công phổ biến được đối thủ sử dụng trong các cuộc tấn công mạng. Cơ sở kiến thức này nhằm mục đích hiểu và diễn đạt các lỗ hổng phổ biến và các phương pháp kẻ tấn công sử dụng để khai thác chúng.
Dịch vụ và giá cả
Trợ giúp và thông tin
Tìm kiếm: ID CVE, ID CWE, ID CAPEC, nhà cung cấp hoặc từ khóa trong CVE
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20