CPE, viết tắt của Liệt kê nền tảng phổ biến, là một lược đồ đặt tên chuẩn hóa cho phần cứng, phần mềm và hệ điều hành. CPE cung cấp lược đồ đặt tên có cấu trúc để xác định và phân loại duy nhất các hệ thống công nghệ thông tin, nền tảng và gói phần mềm dựa trên các thuộc tính nhất định như nhà cung cấp, tên sản phẩm, phiên bản, cập nhật, phiên bản và ngôn ngữ.
CWE, hay Liệt kê điểm yếu phổ biến, là danh sách và phân loại toàn diện các điểm yếu và lỗ hổng phần mềm. Nó phục vụ như ngôn ngữ chung để mô tả các điểm yếu bảo mật phần mềm trong kiến trúc, thiết kế, mã hoặc triển khai có thể dẫn đến lỗ hổng.
CAPEC, viết tắt của Liệt kê và phân loại mẫu tấn công phổ biến, là tài nguyên toàn diện, có sẵn công khai ghi lại các mẫu tấn công phổ biến được đối thủ sử dụng trong các cuộc tấn công mạng. Cơ sở kiến thức này nhằm mục đích hiểu và diễn đạt các lỗ hổng phổ biến và các phương pháp kẻ tấn công sử dụng để khai thác chúng.
Dịch vụ và giá cả
Trợ giúp và thông tin
Tìm kiếm: ID CVE, ID CWE, ID CAPEC, nhà cung cấp hoặc từ khóa trong CVE
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb
mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB
header onto every skb and assumes the headroom for them is already
there. That holds for locally generated traffic, where mac80211
reserves hw->extra_tx_headroom, but forwarded frames are sent through
ieee80211_8023_xmit(), which does not reserve it. Bridge a wired
interface to an mt7925u AP and the first forwarded frame that arrives
short panics the kernel:
skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1
kernel BUG at net/core/skbuff.c:212!
Call trace:
skb_panic+0x58/0x60 (P)
skb_push+0x58/0x60
mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common]
mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb]
__mt76_tx_queue_skb+0x54/0xe8 [mt76]
mt76_txq_schedule.part.0+0x204/0x478 [mt76]
mt76_txq_schedule_all+0x50/0x80 [mt76]
mt792x_tx_worker+0x68/0x100 [mt792x_lib]
__mt76_worker_fn+0x84/0x150 [mt76]
Whether a given setup hits it depends on how much headroom the ingress
netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging
onboard ethernet to a Netgear A9000; originally reported on an MT7986
router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet),
which leaves more headroom, helped narrow the trigger to the ingress
path.
The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76:
mt7921: don't assume adequate headroom for SDIO headers"), but mt7925
was copied from mt7921 without the fix. Add the same guard here.