Linux Kernel 3.16.79

Détails CPE

Linux Kernel 3.16.79
3.16.79
2021-06-01
17h47 +00:00
2021-06-01
18h34 +00:00
Alerte pour un CPE
Restez informé de toutes modifications pour un CPE spécifique.
Gestion des notifications

CPE Name: cpe:2.3:o:linux:linux_kernel:3.16.79:*:*:*:*:*:*:*

Informations

Vendor

linux

Product

linux_kernel

Version

3.16.79

CVE associées

Ouvrir et rechercher dans la liste CVE

CVE ID Publié Description Score Gravité
CVE-2026-100070 2026-09-25 14h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details?
5.5
Moyen
CVE-2026-98158 2026-09-25 11h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocated */ skb_trim(skb, 0); skb_reserve(skb, - skb_headroom(skb)); } ap->rpkt still points at that skb, so the next frame is reassembled into it with no headroom at all. A peer that sends a bad-FCS frame followed by one beginning ff 03 then leaves a single byte of headroom by the time the filter tag is pushed, which lands one byte below skb->head: skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000 data:ffff888003c0ffff tail:0x30 end:0x640 dev: kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x13e/0x230 Call Trace: skb_push+0xbd/0x100 ppp_receive_nonmp_frame+0x48a/0x1d10 ppp_input+0x4e9/0x2f80 ppp_async_process+0x2a/0xe0 tasklet_action_common+0x20f/0x8a0 handle_softirqs+0x18e/0x590 Kernel panic - not syncing: Fatal exception in interrupt Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb() gives the rest of the receive path. Besides the filter panic above, when CCP compression is enabled ppp_decompress_frame() hands skb->data - 2 to ->decompress()/->incomp(), which then reads out of bounds before skb->head for the same reason. Rather than restore the headroom, drop the errored frame - as ppp_synctty already does on its error path - and clear ap->rpkt so the next frame is reassembled into a fresh skb with proper headroom. This is simpler and fixes both the filter under-panic and the CCP out-of-bounds read. The original V1 of this patch made room in ppp_receive_nonmp_frame() with skb_cow_head(); Eric pointed out that fixing the root cause in the transport is the right approach. Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an interesting (remote) DoS: root configures PPP, the peer supplies two crashing frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a second, and returns cleanly with this applied.
5.5
Moyen
CVE-2026-98157 2026-09-25 11h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU.
5.5
Moyen
CVE-2026-64449 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150
7.8
Haute
CVE-2026-64448 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: smb: client: restrict implied bcc[0] exemption to responses without data area smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the ---truncated---
8.2
Haute
CVE-2026-64436 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.
7.1
Haute
CVE-2026-64424 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material.
7.8
Haute
CVE-2026-64423 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0
7.8
Haute
CVE-2026-64422 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP socket state. The sysctl is stored as an `int` but copied into the `u32` `tp->reordering` field for new sockets, so negative writes wrap to large values. With `tcp_mtu_probing=2`, the wrapped value can overflow the `tcp_mtu_probe()` size calculation and drive the MTU probing path into an out-of-bounds read. Route `tcp_reordering` writes through `proc_dointvec_minmax()` and require it to be at least 1. Also require `tcp_max_reordering` to be at least 1 so the configured maximum cannot become negative either. When registering the table for a non-init network namespace, relocate `extra2` pointers that refer into `init_net.ipv4` so the `tcp_reordering` upper bound follows that namespace's `tcp_max_reordering`. Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`. This keeps the send queue and window checks from being bypassed through signed integer overflow.
7.1
Haute
CVE-2026-64413 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place.
7
Haute
CVE-2026-64411 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy.
7.1
Haute
CVE-2026-64408 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: pin L2CAP connection during netdev registration bnep_add_connection() reads the L2CAP connection without holding the channel lock, then passes its HCI device to register_netdev(). Controller teardown can clear and release that connection concurrently, leaving the network device registration path to dereference a freed parent device. Take a reference to the L2CAP connection while holding the channel lock. Retain it until register_netdev() has taken the parent device reference.
8.8
Haute
CVE-2026-64403 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate option length before reading conf opt value l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length.
7.1
Haute
CVE-2026-64375 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link().
7.8
Haute
CVE-2026-64372 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently.
7.8
Haute
CVE-2026-64371 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (part 1) Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock
5.5
Moyen
CVE-2026-64370 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function.
5.5
Moyen
CVE-2026-64363 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced.
7.8
Haute
CVE-2026-64359 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_clean_segments+0x3bd/0xa50 nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline] nilfs_ioctl+0x261f/0x2780 The root cause is that user-supplied segment numbers are not validated before nilfs_clean_segments() begins doing work; the range check on each segnum is performed deep inside the call chain by nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry while still holding the segctor lock and the sufile mi_sem. Under load (repeated invocations across multiple mounts saturating the global printk path), the cumulative printk latency keeps ns_segctor_sem held long enough to trip the hung_task watchdog, blocking concurrent operations such as chmod() that need ns_segctor_sem for read. Fix by validating the contents of kbufs[4] in nilfs_clean_segments() immediately after acquiring ns_segctor_sem via nilfs_transaction_lock(). Holding ns_segctor_sem serializes the check against nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation uses a consistent value. Out-of-range segment numbers are rejected with -EINVAL before any segment-cleaning work begins, so the bad entries never reach the per-element diagnostic path inside nilfs_sufile_updatev().
5.5
Moyen
CVE-2026-64351 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration.
5.5
Moyen
CVE-2026-64348 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed.
7.8
Haute
CVE-2026-64344 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
7.8
Haute
CVE-2026-64343 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
7.8
Haute
CVE-2026-64342 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.
7.8
Haute
CVE-2026-64341 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
7.8
Haute
CVE-2026-64340 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
7.8
Haute
CVE-2026-64335 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port.
5.5
Moyen
CVE-2026-64334 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver.
5.5
Moyen
CVE-2026-64333 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver.
7.8
Haute
CVE-2026-64323 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode.
7.1
Haute
CVE-2026-64322 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size().
7.8
Haute
CVE-2026-64318 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold.
7.1
Haute
CVE-2026-64317 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto-mount them (e.g. via udisks2) without CAP_SYS_ADMIN - so the record contents are attacker-controlled. Reject any component that does not fit in the remaining record bytes before using it. In get_symlink_chunk() return NULL, like the existing output-buffer (plimit) checks, so a malformed record makes readlink() fail with -EIO rather than silently returning a truncated target; in parse_rock_ridge_inode_internal() stop the inode-size walk.
7.1
Haute
CVE-2026-64298 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: NFSv4: include MAY_WRITE in open permission mask for O_TRUNC POSIX requires write permission to truncate a file, so an open() that specifies O_TRUNC must be authorized for write access regardless of the O_ACCMODE access mode. nfs_open_permission_mask() builds the access mask passed to nfs_may_open(), which is the local authorization gate for OPENs the client serves itself from a cached write delegation via the can_open_delegated() path in nfs4_try_open_cached(). The mask is derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a file the caller cannot write requests only MAY_READ and passes the local check. The OPEN is then satisfied locally and the truncation is issued to the server as a SETATTR(size=0) over the delegation stateid, which the server accepts under standard write-delegation semantics. POSIX requires that this open fail with EACCES. Include MAY_WRITE in the mask whenever O_TRUNC is set so the local check matches the access the server would have enforced.
7.1
Haute
CVE-2026-64279 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name).
7.8
Haute
CVE-2026-64273 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched.
7.8
Haute
CVE-2026-64271 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do.
7.8
Haute
CVE-2026-64270 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer.
7.8
Haute
CVE-2026-64266 2026-07-25 10h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning.
7.8
Haute
CVE-2026-64252 2026-07-24 16h16 +00:00 In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Prevent initial console buffer from landing in XKPHYS In 64-bit configurations calling the initial console output handler from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment and consequently so has been the buffer allocated there that is used as the argument corresponding to the `%s' output conversion specifier for the firmware's printf() entry point. This 64-bit address will then be truncated by 32-bit firmware, resulting in an attempt to access the wrong memory location, which in turn will cause all kinds of unpredictable behaviour, such as a kernel crash: Console: colour dummy device 160x64 Calibrating delay loop... 49.36 BogoMIPS (lpj=192512) pid_max: default: 32768 minimum: 301 CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800 Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121 $ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0 $ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073 $ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473 $12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000 $16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240 $20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b $24 : ffffffffffffffbf 000000000203bd00 $28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800 Hi : 0000000000000000 Lo : 0000000000000aa8 epc : ffffffffbfc08364 0xffffffffbfc08364 ra : ffffffffbfc08800 0xffffffffbfc08800 Status: 140120e2 KX SX UX KERNEL EXL Cause : 00000008 (ExcCode 02) BadVA : 000000000203bd00 PrId : 00000430 (R4000SC) Modules linked in: Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d 80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38 0000000000000000 000000000203bd00 0000000000000000 0000000000000000 0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000002500000000 0000000000000000 0000000000000000 802c1a7400000000 0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172 6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320 806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000 ... Call Trace: Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8) >> In this case the pointer in $4 was truncated from 0x980000000203bd00 to 0x000000000203bd00. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started. Fix the issue by making the buffer static and initdata, and therefore placed in the CKSEG0 32-bit compatibility segment, observing that the console output handler is called with the console lock held, implying no need for this code to be reentrant. Add an assertion to verify the buffer actually has been placed in a compatibility segment.
5.5
Moyen
CVE-2026-64234 2026-07-24 16h16 +00:00 In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails.
5.5
Moyen
CVE-2026-64218 2026-07-24 16h16 +00:00 In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging.
7.8
Haute
CVE-2026-64206 2026-07-20 17h18 +00:00 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired.
8.8
Haute
CVE-2026-64191 2026-07-20 17h18 +00:00 In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
7.8
Haute
CVE-2026-64190 2026-07-20 17h18 +00:00 In the Linux kernel, the following vulnerability has been resolved: net: team: fix NULL pointer dereference in team_xmit during mode change __team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel. The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265) The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption. Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present). WRITE_ONCE/READ_ONCE prevent store/load tearing on the handler pointers. synchronize_net() before exit_op() drains in-flight readers that may still reference old mode state from before port removal switched the handlers to dummies.
5.5
Moyen
CVE-2026-64178 2026-07-19 16h18 +00:00 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: Fix UAF read of dev->name bnep_add_connection() needs to keep holding the bnep_session_sem while reading dev->name (just like bnep_get_connlist() does); otherwise the bnep_session() thread can concurrently free the net_device, which can for example be triggered by a concurrent bnep_del_connection(). (This UAF is fairly uninteresting from a security perspective; calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN) check. It also requires completely tearing down a netdev during a fairly tight race window.)
8.8
Haute
CVE-2026-64177 2026-07-19 16h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: phonet/pep: disable BH around forwarded sk_receive_skb() The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the inbound skb targets an existing PEP pipe, it forwards the skb to a different *child* socket via sk_receive_skb(). That helper takes the child slock with bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH is already off. The same child slock therefore ends up acquired with BH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-W Lockdep flags this as inconsistent lock state, and it can become a real self-deadlock if a softirq on the same CPU tries to receive to the same child socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879 Wrap the forwarded sk_receive_skb() in local_bh_disable() / local_bh_enable() so the child slock is always acquired with BH off. local_bh_disable() nests safely on the softirq path. Discovered via in-house syzkaller fuzzing; the same root cause also on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c. Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer: https://pastebin.com/A3t8xzCR
5.5
Moyen
CVE-2026-64133 2026-07-19 16h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access at reading cache find_control() to retrieve a cached info accesses the array with the given index blindly, which may lead to an OOB array access. Add a sanity check for avoiding it.
7.8
Haute
CVE-2026-64115 2026-07-19 16h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix UAF when peer resets connection during handshake vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.
8.8
Haute
CVE-2026-64114 2026-07-19 16h17 +00:00 In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel.
7.8
Haute